În practică funcționare, the vibration directions of the upper and lower polarizatoare of the polarizing microscop should be orthogonal to each other, or in the east-west and north-south directions, fiecare consistent with the transversal and longitudinal directions of the cross hairs of the eyepiece. Uneori only one lower polarizator is used for observation, and the vibration direction of the lower polarizer must be determinat, so the the Polarizator trebuie să fie corectat în timpul funcționării.
(1) Inspecție de încrucișat fire în oculare
În general, it is necessary to check dacă the cross hairs of the eyepiece are ortogonal and consistent with the vibration direction of the the upper and lower polarizatoare. At the same time, select a piece of black mica with complete decolteu and move it to the center of the cross hairs of the eyepiece. Loc decolteul cusătura paralel la unu șuviță de încrucișat fire, înregistrare număr număr de cântare pe the încărcare etapă, și apoi întoarcere animal etapă la make the decolteu cusătură paralel la altul încrucișat fire. Înregistrare număr număr de cântare pe the încărcare etapă, și diferența între două crestături este 90 grad , indicând că încrucișat fire sunt ortogonale.
(2) Determination and Correction of the Vibration Direction of the Lower Polarization Mirror
În general, negru mica este folosit la verificat the vibration direction of the polarizer, deoarece negru mica is a widely distribuit transparent mineral that has features under unipolar light. Firstly, find a piece of decoltee and clear biotite, move it to the center of the eyepiece cross hair, push out the upper polarizer, rotate the stage for one cycle, and observe the color change of the biotite. Pentru că biotit absoarbe the strongest vibration light in the clivage direction, when the color of the biotite reaches * depth, the direction of the clivage seam is the vibration direction of the lower polarizator.
(3) Correction of orthogonality between upper and lower polarizers
