Metoda de funcționare a detectorului de umiditate din lemn de tip pin
1. Gear setting method: first press the gear setting key (SPECIES), then press the test key (TEST), the current gear value is displayed at this time, press the setting key continuously, you can continuously change the gear until you need it. 's gear.
2. Check before measurement: Set to 5th gear according to the above method, then remove the cap of the instrument, touch the probe on the instrument to the two contacts on the cap, press the test key, if the display is 18±1, it means The instrument is normal.
3 Determinare: Introduceți sonda pe instrument în specimenul de lemn care urmează să fie determinat. Apăsați butonul de testare, valoarea afișată de instrument este conținutul mediu de umiditate absolută al piesei de testare. Când conținutul de umiditate al piesei de testare este mai mic de 3, acesta va afișa 3.0.
